Kenya is East Africa's largest economy and a regional manufacturing hub. Factories in Nairobi's Industrial Area, Athi River and Thika deal with voltage fluctuations and frequent generator changeover, so robust transformers, chokes and stabilising equipment are in constant demand.
VA Electricals designs and manufactures buck boost transformers at its works in Bhosari, Pune. Every unit is built to your voltages and rating and tested in-house, then packed for export to buyers in Nairobi Industrial Area, Athi River EPZ, Mombasa and across Kenya.
Built for 240 V single-phase / 415 V three-phase, 50 Hz, with the buck or boost amount chosen to bring your supply to the equipment's rated voltage.
A buck boost transformer raises (boosts) or lowers (bucks) the supply voltage by a small amount so equipment receives the voltage it is designed for. Because it only handles the correction voltage, it is far smaller and more economical than a full isolation transformer for the same load.
For sites in Kenya where the supply sits a little above or below what equipment is rated for, a buck boost transformer corrects the voltage economically, without a full-size transformer.
Lowers a high supply voltage to protect equipment rated for a lower voltage.
View product detailsRaises a low or sagging supply so motors and compressors run at rated voltage.
Designed around your measured supply range and load.
Food, beverage, tea and dairy processors run packaging and process lines across Nairobi and Thika.
Typical use: Keeping refrigeration and process motors at rated voltage.
Panel builders in Nairobi's Industrial Area supply factories and commercial projects.
Typical use: Bucking or boosting supply voltage by a small amount to match equipment.
Kenya's off-grid and commercial solar market needs inverters and power-conversion equipment.
Typical use: Bucking or boosting supply voltage by a small amount to match equipment.
Plastic, packaging and printing units run moulding and extrusion lines.
Typical use: Bucking or boosting supply voltage by a small amount to match equipment.
Cement and building-material plants run crushers, kilns and large motors.
Typical use: Bucking or boosting supply voltage by a small amount to match equipment.
Telecom towers and data facilities depend on inverter and UPS-based backup power.
Typical use: Holding voltage steady at remote equipment sites.
Many sites in Kenya run on a mix of grid power and diesel generators, with voltage swings and frequent changeovers. Tell us your supply conditions and we design with margin on voltage, temperature rise and duty, so equipment stays protected.
| Function | Buck (step-down) or boost (step-up) voltage correction |
|---|---|
| Rating | As per load and correction required |
| Supply | 240 V single-phase / 415 V three-phase, 50 Hz systems |
| Correction | Set to bring supply to equipment's rated voltage |
| Frequency | 50 Hz (Kenyan grid standard) |
| Construction | Open frame or enclosed |
| Compliance | CE marked under LVD 2014/35/EU (transformers up to 200 kVA); ISO 9001:2015 production |
| Routine tests | Ratio, no-load, insulation resistance, HV breakdown, winding resistance |
Orders for Kenya ship by sea from Nhava Sheva (JNPT) to the port of Mombasa, with onward road or rail delivery to Nairobi and other inland cities. Urgent consignments can travel by air freight to Nairobi.
Send your requirement
Of transformer design and manufacturing experience behind every unit.
ISO 9001:2015 quality system and CE conformity under the Low Voltage Directive.
Voltages, ratings, terminals and mounting made to match your design.
Production planned around your project schedule and export shipping dates.
Yes. VA Electricals manufactures buck boost transformers at its works in Pune, India and supplies buyers across Kenya, including Nairobi Industrial Area, Athi River EPZ, Mombasa, Thika, Nakuru.
Yes. Units are built for the 240 V single-phase / 415 V three-phase, 50 Hz supply used in Kenya, with the buck or boost amount chosen to bring your supply to the equipment's rated voltage.
When the supply only needs a small voltage correction and isolation is not required. A buck boost unit handles only the correction voltage, so it is smaller, lighter and lower in cost for the same load.
VA Electricals operates an ISO 9001:2015 certified quality management system and holds MSME ZED Bronze certification. Its products carry CE conformity under the Low Voltage Directive 2014/35/EU, covering transformers up to 200 kVA.
Shipped by sea from Nhava Sheva to Mombasa, with onward delivery inland and air freight for urgent needs.
Yes. Tell us about voltage fluctuations, generator use and ambient temperature. We build in margin on voltage, temperature rise and duty so units stay reliable on unstable supplies.
Share your voltages, rating and quantity. Our engineers will send a technical offer for supply to Nairobi Industrial Area, Athi River EPZ, Mombasa or anywhere in Kenya.