Vadodara is Gujarat's electrical engineering capital, home to transformer, switchgear and power-equipment makers in Makarpura and Por GIDCs. The petrochemical complexes, Savli's engineering units and Halol's automotive plants add to the region's industrial depth.
VA Electricals designs and manufactures single-phase control transformers at its works in Bhosari, Pune. Every unit is built to your voltages and rating and tested in-house, then delivered by road to customers in Makarpura GIDC, Por GIDC, Savli GIDC and across Vadodara.
Built for 230 V single-phase / 415 V three-phase, 50 Hz, with secondaries such as 24 V, 110 V or 230 V for control circuits.
A single phase control transformer provides the voltage needed by control circuits in electrical and industrial equipment. It electrically separates the control circuit from the main power circuit while supplying a suitable control voltage to relays, contactors, timers, sensors and solenoid valves.
Panel builders and OEMs in Vadodara use them where a compact, single-phase control supply is needed inside the cabinet, sized for the coil inrush of the contactors and relays it feeds.
Compact units for control panels, MCC panels and machine control cabinets.
View product detailsMultiple primary and secondary voltages in one unit for flexible stocking and export machines.
View product detailsInput voltage, output voltage, capacity and construction made to your specification.
Makarpura and Por GIDCs host a large cluster of electrical, switchgear and power-equipment manufacturers.
Typical use: Single-phase control voltage for relays, contactors and solenoids.
Refineries and petrochemical complexes around Vadodara run large process and utility plants.
Typical use: Single-phase control voltage for relays, contactors and solenoids.
Nandesari GIDC is a major chemical estate with continuous process plants.
Typical use: Single-phase control voltage for relays, contactors and solenoids.
Halol hosts automotive plants and their component suppliers.
Typical use: Single-phase control voltage for relays, contactors and solenoids.
Panel builders supply MCC, PCC and automation panels for EPC projects.
Typical use: Single-phase 230, 110 or 24 V control supply for relay and contactor circuits.
Savli and Manjusar GIDCs host heavy engineering and machine-building units.
Typical use: Compact control transformers mounted inside machine control cabinets.
Plants in Vadodara see summer heat in panel rooms, monsoon humidity and supply fluctuations. Share your duty cycle and ambient conditions, and we design the rating, insulation and construction to suit.
| Transformer type | Single phase control transformer |
|---|---|
| Rating | VA ratings as per control circuit load |
| Input voltage | 230 V or as specified |
| Output voltage | 24 V, 110 V, 230 V or as per control circuit requirement |
| Frequency | 50 Hz (Indian grid standard) |
| Winding | Double-wound isolation |
| Mounting | As per application requirement |
| Compliance | CE marked under LVD 2014/35/EU (transformers up to 200 kVA); ISO 9001:2015 production |
| Routine tests | Ratio, no-load, insulation resistance, HV breakdown, winding resistance |
Orders for Vadodara are dispatched by road from our works in Bhosari, Pune, about 560 km away. Every consignment is packed to protect windings and terminals in transit. Consignments travel by road transport with dispatch details shared in advance, so your project or production schedule stays on track.
Send your requirement
Of transformer design and manufacturing experience behind every unit.
ISO 9001:2015 quality system and CE conformity under the Low Voltage Directive.
Voltages, ratings, terminals and mounting made to match your design.
Production planned around your project schedule and delivery dates.
Yes. VA Electricals manufactures single-phase control transformers at its works in Pune, India and supplies customers across Vadodara, including Makarpura GIDC, Por GIDC, Savli GIDC, Waghodia GIDC, Nandesari GIDC.
Yes. Units are built for the 230 V single-phase / 415 V three-phase, 50 Hz supply used in Vadodara, with secondaries such as 24 V, 110 V or 230 V for control circuits.
It supplies a stable, isolated control voltage to relays, contactors, timers, solenoid valves and PLC circuits in control panels, motor control centres and machines.
VA Electricals operates an ISO 9001:2015 certified quality management system and holds MSME ZED Bronze certification. Its products carry CE conformity under the Low Voltage Directive 2014/35/EU, covering transformers up to 200 kVA.
Dispatched by road from our Pune works, about 560 km away, packed to protect windings and terminals in transit.
Yes. Tell us the ambient temperature, duty cycle and supply conditions at your plant, and we design the rating, insulation and construction to suit.
Share your voltages, rating and quantity. Our engineers will send a technical offer for supply to Makarpura GIDC, Por GIDC, Savli GIDC or anywhere in Vadodara.