Thane district is one of Maharashtra's oldest engineering belts. Wagle Estate, Ambernath, Dombivli and Badlapur MIDCs host machine builders, chemical plants and panel manufacturers, while Bhiwandi has grown into a major warehousing and textile cluster.
VA Electricals designs and manufactures single-phase control transformers at its works in Bhosari, Pune. Every unit is built to your voltages and rating and tested in-house, then delivered by road to customers in Wagle Estate, Thane-Belapur Road, Kolshet and across Thane.
Built for 230 V single-phase / 415 V three-phase, 50 Hz, with secondaries such as 24 V, 110 V or 230 V for control circuits.
A single phase control transformer provides the voltage needed by control circuits in electrical and industrial equipment. It electrically separates the control circuit from the main power circuit while supplying a suitable control voltage to relays, contactors, timers, sensors and solenoid valves.
Panel builders and OEMs in Thane use them where a compact, single-phase control supply is needed inside the cabinet, sized for the coil inrush of the contactors and relays it feeds.
Compact units for control panels, MCC panels and machine control cabinets.
View product detailsMultiple primary and secondary voltages in one unit for flexible stocking and export machines.
View product detailsInput voltage, output voltage, capacity and construction made to your specification.
Panel builders along Wagle Estate and the Thane-Belapur Road supply control and distribution panels to industry across western India.
Typical use: Single-phase 230, 110 or 24 V control supply for relay and contactor circuits.
Dombivli and Ambernath MIDCs host many chemical, dye-intermediate and pharma units with process-control panels.
Typical use: Single-phase control voltage for relays, contactors and solenoids.
Machine builders in Ambernath, Badlapur and Kalyan make special-purpose, packaging and process machinery.
Typical use: Compact control transformers mounted inside machine control cabinets.
Bhiwandi's powerloom cluster runs thousands of looms that need stable supply and drive protection.
Typical use: Single-phase control voltage for relays, contactors and solenoids.
Municipal and industrial water and effluent treatment plants run large pump and blower drives.
Typical use: Control circuits of pump starters and float-switch panels.
Food processing and packaging units in the Thane belt rely on conveyors, fillers and sealing machines.
Typical use: Control circuits on filling, sealing and packaging machines.
Plants in Thane see summer heat in panel rooms, monsoon humidity and supply fluctuations. Share your duty cycle and ambient conditions, and we design the rating, insulation and construction to suit.
| Transformer type | Single phase control transformer |
|---|---|
| Rating | VA ratings as per control circuit load |
| Input voltage | 230 V or as specified |
| Output voltage | 24 V, 110 V, 230 V or as per control circuit requirement |
| Frequency | 50 Hz (Indian grid standard) |
| Winding | Double-wound isolation |
| Mounting | As per application requirement |
| Compliance | CE marked under LVD 2014/35/EU (transformers up to 200 kVA); ISO 9001:2015 production |
| Routine tests | Ratio, no-load, insulation resistance, HV breakdown, winding resistance |
Orders for Thane are dispatched by road from our works in Bhosari, Pune, about 150 km away. Every consignment is packed to protect windings and terminals in transit. Being this close, deliveries are quick and our engineers are easy to reach for technical discussions or site visits.
Send your requirement
Of transformer design and manufacturing experience behind every unit.
ISO 9001:2015 quality system and CE conformity under the Low Voltage Directive.
Voltages, ratings, terminals and mounting made to match your design.
Production planned around your project schedule and delivery dates.
Yes. VA Electricals manufactures single-phase control transformers at its works in Pune, India and supplies customers across Thane, including Wagle Estate, Thane-Belapur Road, Kolshet, Bhiwandi, Ambernath MIDC.
Yes. Units are built for the 230 V single-phase / 415 V three-phase, 50 Hz supply used in Thane, with secondaries such as 24 V, 110 V or 230 V for control circuits.
It supplies a stable, isolated control voltage to relays, contactors, timers, solenoid valves and PLC circuits in control panels, motor control centres and machines.
VA Electricals operates an ISO 9001:2015 certified quality management system and holds MSME ZED Bronze certification. Its products carry CE conformity under the Low Voltage Directive 2014/35/EU, covering transformers up to 200 kVA.
Dispatched by road from our Pune works, about 150 km away, packed to protect windings and terminals in transit.
Yes. Tell us the ambient temperature, duty cycle and supply conditions at your plant, and we design the rating, insulation and construction to suit.
Share your voltages, rating and quantity. Our engineers will send a technical offer for supply to Wagle Estate, Thane-Belapur Road, Kolshet or anywhere in Thane.