Chhatrapati Sambhajinagar, still widely known as Aurangabad, is an important automotive and engineering city. Waluj, Shendra and Chikalthana MIDCs host vehicle plants, auto component suppliers and pharma units, and the AURIC industrial city is attracting new investment.
VA Electricals designs and manufactures three-phase line, input and output chokes at its works in Bhosari, Pune. Every unit is built to your voltages and rating and tested in-house, then delivered by road to customers in Waluj MIDC, Shendra MIDC, Chikalthana MIDC and across Aurangabad.
Rated for 230 V single-phase / 415 V three-phase, 50 Hz systems, with inductance and current rating matched to your drive.
A three-phase line choke is an inductor connected in series with a drive or rectifier. On the input side it reduces harmonic current and protects the drive from line spikes and notching. On the output side it limits dv/dt and protects motors fed through long cables.
For drive users in Aurangabad, a line choke on the input or output of a VFD reduces harmonics, limits inrush and protects the drive and motor from spikes and long-cable effects.
Reduce harmonic distortion and electrical noise on drive and rectifier supplies.
View product detailsProtect drives from line spikes and limit inrush current.
Limit dv/dt and protect motors on long cable runs.
Waluj and Shendra MIDCs host two-wheeler, vehicle and auto component plants with large machining lines.
Typical use: Input and output chokes for VFDs and drives.
Pharma and biotech units in Chikalthana and Waluj run clean-room HVAC and process systems.
Typical use: Input and output chokes for VFDs and drives.
Machine shops and fabricators support the automotive and engineering supply chain.
Typical use: Protecting machine drives from line spikes and notching.
Steel re-rolling and foundry units in Jalna run induction furnaces and heavy drives.
Typical use: Input and output chokes for VFDs and drives.
Local panel builders supply automation and MCC panels to plants across Marathwada.
Typical use: Input and output chokes in VFD and drive panels.
Breweries, beverage and food plants in the region run filling and packaging lines.
Typical use: Input and output chokes for VFDs and drives.
Plants in Aurangabad see summer heat in panel rooms, monsoon humidity and supply fluctuations. Share your duty cycle and ambient conditions, and we design the rating, insulation and construction to suit.
| Type | Three-phase line, input and output chokes |
|---|---|
| Current rating | Up to 1000 A |
| System voltage | 230 V single-phase / 415 V three-phase, 50 Hz |
| Inductance | Matched to drive rating and % impedance required |
| Frequency | 50 Hz (Indian grid standard) |
| Construction | Open frame, panel mounting |
| Compliance | CE marked under LVD 2014/35/EU (chokes and reactors up to 1000 A); ISO 9001:2015 production |
| Routine tests | Inductance (LCR), insulation resistance, HV breakdown, winding resistance |
Orders for Aurangabad are dispatched by road from our works in Bhosari, Pune, about 235 km away. Every consignment is packed to protect windings and terminals in transit. Being this close, deliveries are quick and our engineers are easy to reach for technical discussions or site visits.
Send your requirement
Of transformer design and manufacturing experience behind every unit.
ISO 9001:2015 quality system and CE conformity under the Low Voltage Directive.
Voltages, ratings, terminals and mounting made to match your design.
Production planned around your project schedule and delivery dates.
Yes. VA Electricals manufactures three-phase line, input and output chokes at its works in Pune, India and supplies customers across Aurangabad, including Waluj MIDC, Shendra MIDC, Chikalthana MIDC, AURIC, Bidkin.
Yes. Units are built for the 230 V single-phase / 415 V three-phase, 50 Hz supply used in Aurangabad, with inductance and current rating matched to your drive.
An input choke sits between the supply and the drive to reduce harmonics and protect against line spikes. An output choke sits between the drive and motor to limit dv/dt and protect motors on long cable runs.
VA Electricals operates an ISO 9001:2015 certified quality management system and holds MSME ZED Bronze certification. Its products carry CE conformity under the Low Voltage Directive 2014/35/EU, covering chokes and reactors up to 1000 A.
Dispatched by road from our Pune works, about 235 km away, packed to protect windings and terminals in transit.
Yes. Tell us the ambient temperature, duty cycle and supply conditions at your plant, and we design the rating, insulation and construction to suit.
Share your voltages, rating and quantity. Our engineers will send a technical offer for supply to Waluj MIDC, Shendra MIDC, Chikalthana MIDC or anywhere in Aurangabad.