Navi Mumbai's Trans-Thane Creek (TTC) MIDC, stretching from Turbhe and Mahape to Rabale and Pawane, is a dense cluster of electronics, engineering and chemical units. Taloja MIDC and the JNPT port corridor add heavy industry, warehousing and export-oriented plants.
VA Electricals designs and manufactures three-phase line, input and output chokes at its works in Bhosari, Pune. Every unit is built to your voltages and rating and tested in-house, then delivered by road to customers in TTC MIDC Turbhe, Mahape, Rabale and across Navi Mumbai.
Rated for 230 V single-phase / 415 V three-phase, 50 Hz systems, with inductance and current rating matched to your drive.
A three-phase line choke is an inductor connected in series with a drive or rectifier. On the input side it reduces harmonic current and protects the drive from line spikes and notching. On the output side it limits dv/dt and protects motors fed through long cables.
For drive users in Navi Mumbai, a line choke on the input or output of a VFD reduces harmonics, limits inrush and protects the drive and motor from spikes and long-cable effects.
Reduce harmonic distortion and electrical noise on drive and rectifier supplies.
View product detailsProtect drives from line spikes and limit inrush current.
Limit dv/dt and protect motors on long cable runs.
TTC MIDC units in Mahape and Rabale build electronic, UPS and power-conversion equipment.
Typical use: Input and output chokes for VFDs and drives.
Taloja MIDC is a major chemical and pharmaceutical zone with continuous-process plants.
Typical use: Input and output chokes for VFDs and drives.
Data centres in Mahape, Airoli and Rabale need reliable UPS and power-quality equipment.
Typical use: Input and output chokes for VFDs and drives.
Panel builders in Pawane and Turbhe supply automation and distribution panels.
Typical use: Input and output chokes in VFD and drive panels.
Engineering and fabrication workshops in Taloja and Panvel run welding and heavy machinery.
Typical use: Input and output chokes for VFDs and drives.
Plastic processing and packaging units run moulding and extrusion machines on VFDs.
Typical use: Chokes on extruder and moulding-machine drives.
Plants in Navi Mumbai see summer heat in panel rooms, monsoon humidity and supply fluctuations. Share your duty cycle and ambient conditions, and we design the rating, insulation and construction to suit.
| Type | Three-phase line, input and output chokes |
|---|---|
| Current rating | Up to 1000 A |
| System voltage | 230 V single-phase / 415 V three-phase, 50 Hz |
| Inductance | Matched to drive rating and % impedance required |
| Frequency | 50 Hz (Indian grid standard) |
| Construction | Open frame, panel mounting |
| Compliance | CE marked under LVD 2014/35/EU (chokes and reactors up to 1000 A); ISO 9001:2015 production |
| Routine tests | Inductance (LCR), insulation resistance, HV breakdown, winding resistance |
Orders for Navi Mumbai are dispatched by road from our works in Bhosari, Pune, about 120 km away. Every consignment is packed to protect windings and terminals in transit. Being this close, deliveries are quick and our engineers are easy to reach for technical discussions or site visits.
Send your requirement
Of transformer design and manufacturing experience behind every unit.
ISO 9001:2015 quality system and CE conformity under the Low Voltage Directive.
Voltages, ratings, terminals and mounting made to match your design.
Production planned around your project schedule and delivery dates.
Yes. VA Electricals manufactures three-phase line, input and output chokes at its works in Pune, India and supplies customers across Navi Mumbai, including TTC MIDC Turbhe, Mahape, Rabale, Pawane, Ghansoli.
Yes. Units are built for the 230 V single-phase / 415 V three-phase, 50 Hz supply used in Navi Mumbai, with inductance and current rating matched to your drive.
An input choke sits between the supply and the drive to reduce harmonics and protect against line spikes. An output choke sits between the drive and motor to limit dv/dt and protect motors on long cable runs.
VA Electricals operates an ISO 9001:2015 certified quality management system and holds MSME ZED Bronze certification. Its products carry CE conformity under the Low Voltage Directive 2014/35/EU, covering chokes and reactors up to 1000 A.
Dispatched by road from our Pune works, about 120 km away, packed to protect windings and terminals in transit.
Yes. Tell us the ambient temperature, duty cycle and supply conditions at your plant, and we design the rating, insulation and construction to suit.
Share your voltages, rating and quantity. Our engineers will send a technical offer for supply to TTC MIDC Turbhe, Mahape, Rabale or anywhere in Navi Mumbai.