Chhatrapati Sambhajinagar, still widely known as Aurangabad, is an important automotive and engineering city. Waluj, Shendra and Chikalthana MIDCs host vehicle plants, auto component suppliers and pharma units, and the AURIC industrial city is attracting new investment.
VA Electricals designs and manufactures buck boost transformers at its works in Bhosari, Pune. Every unit is built to your voltages and rating and tested in-house, then delivered by road to customers in Waluj MIDC, Shendra MIDC, Chikalthana MIDC and across Aurangabad.
Built for 230 V single-phase / 415 V three-phase, 50 Hz, with the buck or boost amount chosen to bring your supply to the equipment's rated voltage.
A buck boost transformer raises (boosts) or lowers (bucks) the supply voltage by a small amount so equipment receives the voltage it is designed for. Because it only handles the correction voltage, it is far smaller and more economical than a full isolation transformer for the same load.
For sites in Aurangabad where the supply sits a little above or below what equipment is rated for, a buck boost transformer corrects the voltage economically, without a full-size transformer.
Lowers a high supply voltage to protect equipment rated for a lower voltage.
View product detailsRaises a low or sagging supply so motors and compressors run at rated voltage.
Designed around your measured supply range and load.
Waluj and Shendra MIDCs host two-wheeler, vehicle and auto component plants with large machining lines.
Typical use: Bucking or boosting supply voltage by a small amount to match equipment.
Pharma and biotech units in Chikalthana and Waluj run clean-room HVAC and process systems.
Typical use: Bucking or boosting supply voltage by a small amount to match equipment.
Machine shops and fabricators support the automotive and engineering supply chain.
Typical use: Correcting supply voltage for imported machines rated for a different voltage.
Steel re-rolling and foundry units in Jalna run induction furnaces and heavy drives.
Typical use: Bucking or boosting supply voltage by a small amount to match equipment.
Local panel builders supply automation and MCC panels to plants across Marathwada.
Typical use: Bucking or boosting supply voltage by a small amount to match equipment.
Breweries, beverage and food plants in the region run filling and packaging lines.
Typical use: Keeping refrigeration and process motors at rated voltage.
Plants in Aurangabad see summer heat in panel rooms, monsoon humidity and supply fluctuations. Share your duty cycle and ambient conditions, and we design the rating, insulation and construction to suit.
| Function | Buck (step-down) or boost (step-up) voltage correction |
|---|---|
| Rating | As per load and correction required |
| Supply | 230 V single-phase / 415 V three-phase, 50 Hz systems |
| Correction | Set to bring supply to equipment's rated voltage |
| Frequency | 50 Hz (Indian grid standard) |
| Construction | Open frame or enclosed |
| Compliance | CE marked under LVD 2014/35/EU (transformers up to 200 kVA); ISO 9001:2015 production |
| Routine tests | Ratio, no-load, insulation resistance, HV breakdown, winding resistance |
Orders for Aurangabad are dispatched by road from our works in Bhosari, Pune, about 235 km away. Every consignment is packed to protect windings and terminals in transit. Being this close, deliveries are quick and our engineers are easy to reach for technical discussions or site visits.
Send your requirement
Of transformer design and manufacturing experience behind every unit.
ISO 9001:2015 quality system and CE conformity under the Low Voltage Directive.
Voltages, ratings, terminals and mounting made to match your design.
Production planned around your project schedule and delivery dates.
Yes. VA Electricals manufactures buck boost transformers at its works in Pune, India and supplies customers across Aurangabad, including Waluj MIDC, Shendra MIDC, Chikalthana MIDC, AURIC, Bidkin.
Yes. Units are built for the 230 V single-phase / 415 V three-phase, 50 Hz supply used in Aurangabad, with the buck or boost amount chosen to bring your supply to the equipment's rated voltage.
When the supply only needs a small voltage correction and isolation is not required. A buck boost unit handles only the correction voltage, so it is smaller, lighter and lower in cost for the same load.
VA Electricals operates an ISO 9001:2015 certified quality management system and holds MSME ZED Bronze certification. Its products carry CE conformity under the Low Voltage Directive 2014/35/EU, covering transformers up to 200 kVA.
Dispatched by road from our Pune works, about 235 km away, packed to protect windings and terminals in transit.
Yes. Tell us the ambient temperature, duty cycle and supply conditions at your plant, and we design the rating, insulation and construction to suit.
Share your voltages, rating and quantity. Our engineers will send a technical offer for supply to Waluj MIDC, Shendra MIDC, Chikalthana MIDC or anywhere in Aurangabad.