Coimbatore is a major centre for pumps, motors, textile machinery and foundries. Nearby Tiruppur is India's knitwear capital, and the region's many small engineering units build equipment for India and abroad.
VA Electricals designs and manufactures three-phase line, input and output chokes at its works in Bhosari, Pune. Every unit is built to your voltages and rating and tested in-house, then delivered by road to customers in SIDCO Kurichi, Ganapathy, Peelamedu and across Coimbatore.
Rated for 230 V single-phase / 415 V three-phase, 50 Hz systems, with inductance and current rating matched to your drive.
A three-phase line choke is an inductor connected in series with a drive or rectifier. On the input side it reduces harmonic current and protects the drive from line spikes and notching. On the output side it limits dv/dt and protects motors fed through long cables.
For drive users in Coimbatore, a line choke on the input or output of a VFD reduces harmonics, limits inrush and protects the drive and motor from spikes and long-cable effects.
Reduce harmonic distortion and electrical noise on drive and rectifier supplies.
View product detailsProtect drives from line spikes and limit inrush current.
Limit dv/dt and protect motors on long cable runs.
Coimbatore is India's leading pump and motor manufacturing centre.
Typical use: Drive chokes for large pump motors.
Spinning mills and Tiruppur's knitwear and processing units run machinery round the clock.
Typical use: Chokes on loom and spinning-frame drives.
Foundries in SIDCO Kurichi and Malumichampatti supply castings to pump and auto makers.
Typical use: Input and output chokes for VFDs and drives.
Textile machinery and machine tool builders supply Indian and export markets.
Typical use: Protecting machine drives from line spikes and notching.
Local panel builders make starters and automation panels for pump and textile users.
Typical use: Input and output chokes in VFD and drive panels.
Windmills and solar farms across western Tamil Nadu need power-conversion equipment.
Typical use: Input and output chokes for VFDs and drives.
Plants in Coimbatore see summer heat in panel rooms, monsoon humidity and supply fluctuations. Share your duty cycle and ambient conditions, and we design the rating, insulation and construction to suit.
| Type | Three-phase line, input and output chokes |
|---|---|
| Current rating | Up to 1000 A |
| System voltage | 230 V single-phase / 415 V three-phase, 50 Hz |
| Inductance | Matched to drive rating and % impedance required |
| Frequency | 50 Hz (Indian grid standard) |
| Construction | Open frame, panel mounting |
| Compliance | CE marked under LVD 2014/35/EU (chokes and reactors up to 1000 A); ISO 9001:2015 production |
| Routine tests | Inductance (LCR), insulation resistance, HV breakdown, winding resistance |
Orders for Coimbatore are dispatched by road from our works in Bhosari, Pune, about 1000 km away. Every consignment is packed to protect windings and terminals in transit. Consignments travel by road transport with dispatch details shared in advance, so your project or production schedule stays on track.
Send your requirement
Of transformer design and manufacturing experience behind every unit.
ISO 9001:2015 quality system and CE conformity under the Low Voltage Directive.
Voltages, ratings, terminals and mounting made to match your design.
Production planned around your project schedule and delivery dates.
Yes. VA Electricals manufactures three-phase line, input and output chokes at its works in Pune, India and supplies customers across Coimbatore, including SIDCO Kurichi, Ganapathy, Peelamedu, Malumichampatti, Kaniyur.
Yes. Units are built for the 230 V single-phase / 415 V three-phase, 50 Hz supply used in Coimbatore, with inductance and current rating matched to your drive.
An input choke sits between the supply and the drive to reduce harmonics and protect against line spikes. An output choke sits between the drive and motor to limit dv/dt and protect motors on long cable runs.
VA Electricals operates an ISO 9001:2015 certified quality management system and holds MSME ZED Bronze certification. Its products carry CE conformity under the Low Voltage Directive 2014/35/EU, covering chokes and reactors up to 1000 A.
Dispatched by road from our Pune works, about 1000 km away, packed to protect windings and terminals in transit.
Yes. Tell us the ambient temperature, duty cycle and supply conditions at your plant, and we design the rating, insulation and construction to suit.
Share your voltages, rating and quantity. Our engineers will send a technical offer for supply to SIDCO Kurichi, Ganapathy, Peelamedu or anywhere in Coimbatore.