Chennai is often called the Detroit of India. Sriperumbudur, Oragadam and Maraimalai Nagar host vehicle plants and large electronics factories, while Ambattur and Guindy remain busy engineering estates.
VA Electricals designs and manufactures three-phase line, input and output chokes at its works in Bhosari, Pune. Every unit is built to your voltages and rating and tested in-house, then delivered by road to customers in Ambattur, Guindy, Sriperumbudur and across Chennai.
Rated for 230 V single-phase / 415 V three-phase, 50 Hz systems, with inductance and current rating matched to your drive.
A three-phase line choke is an inductor connected in series with a drive or rectifier. On the input side it reduces harmonic current and protects the drive from line spikes and notching. On the output side it limits dv/dt and protects motors fed through long cables.
For drive users in Chennai, a line choke on the input or output of a VFD reduces harmonics, limits inrush and protects the drive and motor from spikes and long-cable effects.
Reduce harmonic distortion and electrical noise on drive and rectifier supplies.
View product detailsProtect drives from line spikes and limit inrush current.
Limit dv/dt and protect motors on long cable runs.
Oragadam, Sriperumbudur and Maraimalai Nagar host car, truck and two-wheeler plants and their suppliers.
Typical use: Input and output chokes for VFDs and drives.
Electronics manufacturing in Sriperumbudur builds phones, appliances and power products.
Typical use: Input and output chokes for VFDs and drives.
Ambattur and Guindy estates host machine shops and capital equipment makers.
Typical use: Protecting machine drives from line spikes and notching.
Panel builders serve automotive, process and infrastructure projects.
Typical use: Input and output chokes in VFD and drive panels.
Desalination plants and water utilities run large pumping stations.
Typical use: Drive chokes for large pump motors.
Chennai's landing stations and data-centre campuses need resilient power systems.
Typical use: Input and output chokes for VFDs and drives.
Plants in Chennai see summer heat in panel rooms, monsoon humidity and supply fluctuations. Share your duty cycle and ambient conditions, and we design the rating, insulation and construction to suit.
| Type | Three-phase line, input and output chokes |
|---|---|
| Current rating | Up to 1000 A |
| System voltage | 230 V single-phase / 415 V three-phase, 50 Hz |
| Inductance | Matched to drive rating and % impedance required |
| Frequency | 50 Hz (Indian grid standard) |
| Construction | Open frame, panel mounting |
| Compliance | CE marked under LVD 2014/35/EU (chokes and reactors up to 1000 A); ISO 9001:2015 production |
| Routine tests | Inductance (LCR), insulation resistance, HV breakdown, winding resistance |
Orders for Chennai are dispatched by road from our works in Bhosari, Pune, about 1180 km away. Every consignment is packed to protect windings and terminals in transit. Consignments travel by road transport with dispatch details shared in advance, so your project or production schedule stays on track.
Send your requirement
Of transformer design and manufacturing experience behind every unit.
ISO 9001:2015 quality system and CE conformity under the Low Voltage Directive.
Voltages, ratings, terminals and mounting made to match your design.
Production planned around your project schedule and delivery dates.
Yes. VA Electricals manufactures three-phase line, input and output chokes at its works in Pune, India and supplies customers across Chennai, including Ambattur, Guindy, Sriperumbudur, Oragadam, Irungattukottai.
Yes. Units are built for the 230 V single-phase / 415 V three-phase, 50 Hz supply used in Chennai, with inductance and current rating matched to your drive.
An input choke sits between the supply and the drive to reduce harmonics and protect against line spikes. An output choke sits between the drive and motor to limit dv/dt and protect motors on long cable runs.
VA Electricals operates an ISO 9001:2015 certified quality management system and holds MSME ZED Bronze certification. Its products carry CE conformity under the Low Voltage Directive 2014/35/EU, covering chokes and reactors up to 1000 A.
Dispatched by road from our Pune works, about 1180 km away, packed to protect windings and terminals in transit.
Yes. Tell us the ambient temperature, duty cycle and supply conditions at your plant, and we design the rating, insulation and construction to suit.
Share your voltages, rating and quantity. Our engineers will send a technical offer for supply to Ambattur, Guindy, Sriperumbudur or anywhere in Chennai.