Ludhiana is Punjab's industrial capital, famous for bicycles, hosiery, machine tools and auto parts. Focal Point and the Industrial Areas run thousands of small and medium units, and nearby Mandi Gobindgarh is a major steel re-rolling centre.
VA Electricals designs and manufactures three-phase line, input and output chokes at its works in Bhosari, Pune. Every unit is built to your voltages and rating and tested in-house, then delivered by road to customers in Focal Point, Industrial Area A, Industrial Area B and across Ludhiana.
Rated for 230 V single-phase / 415 V three-phase, 50 Hz systems, with inductance and current rating matched to your drive.
A three-phase line choke is an inductor connected in series with a drive or rectifier. On the input side it reduces harmonic current and protects the drive from line spikes and notching. On the output side it limits dv/dt and protects motors fed through long cables.
For drive users in Ludhiana, a line choke on the input or output of a VFD reduces harmonics, limits inrush and protects the drive and motor from spikes and long-cable effects.
Reduce harmonic distortion and electrical noise on drive and rectifier supplies.
View product detailsProtect drives from line spikes and limit inrush current.
Limit dv/dt and protect motors on long cable runs.
Machine tool, sewing machine and agricultural equipment makers serve India and export markets.
Typical use: Protecting machine drives from line spikes and notching.
Ludhiana's hosiery and knitwear units run knitting and finishing machinery.
Typical use: Chokes on loom and spinning-frame drives.
Bicycle, two-wheeler part and tractor component makers run machining lines.
Typical use: Input and output chokes for VFDs and drives.
Mandi Gobindgarh's re-rolling mills and Ludhiana's forging units run heavy drives.
Typical use: Input and output chokes for VFDs and drives.
Panel builders supply starters and automation panels across Punjab.
Typical use: Input and output chokes in VFD and drive panels.
Food processing and dairy plants run refrigeration and packaging equipment.
Typical use: Input and output chokes for VFDs and drives.
Plants in Ludhiana see summer heat in panel rooms, monsoon humidity and supply fluctuations. Share your duty cycle and ambient conditions, and we design the rating, insulation and construction to suit.
| Type | Three-phase line, input and output chokes |
|---|---|
| Current rating | Up to 1000 A |
| System voltage | 230 V single-phase / 415 V three-phase, 50 Hz |
| Inductance | Matched to drive rating and % impedance required |
| Frequency | 50 Hz (Indian grid standard) |
| Construction | Open frame, panel mounting |
| Compliance | CE marked under LVD 2014/35/EU (chokes and reactors up to 1000 A); ISO 9001:2015 production |
| Routine tests | Inductance (LCR), insulation resistance, HV breakdown, winding resistance |
Orders for Ludhiana are dispatched by road from our works in Bhosari, Pune, about 1730 km away. Every consignment is packed to protect windings and terminals in transit. Consignments travel by road transport with dispatch details shared in advance, so your project or production schedule stays on track.
Send your requirement
Of transformer design and manufacturing experience behind every unit.
ISO 9001:2015 quality system and CE conformity under the Low Voltage Directive.
Voltages, ratings, terminals and mounting made to match your design.
Production planned around your project schedule and delivery dates.
Yes. VA Electricals manufactures three-phase line, input and output chokes at its works in Pune, India and supplies customers across Ludhiana, including Focal Point, Industrial Area A, Industrial Area B, Dhandari Kalan, Sahnewal.
Yes. Units are built for the 230 V single-phase / 415 V three-phase, 50 Hz supply used in Ludhiana, with inductance and current rating matched to your drive.
An input choke sits between the supply and the drive to reduce harmonics and protect against line spikes. An output choke sits between the drive and motor to limit dv/dt and protect motors on long cable runs.
VA Electricals operates an ISO 9001:2015 certified quality management system and holds MSME ZED Bronze certification. Its products carry CE conformity under the Low Voltage Directive 2014/35/EU, covering chokes and reactors up to 1000 A.
Dispatched by road from our Pune works, about 1730 km away, packed to protect windings and terminals in transit.
Yes. Tell us the ambient temperature, duty cycle and supply conditions at your plant, and we design the rating, insulation and construction to suit.
Share your voltages, rating and quantity. Our engineers will send a technical offer for supply to Focal Point, Industrial Area A, Industrial Area B or anywhere in Ludhiana.