Delhi NCR is North India's largest manufacturing and trading region. Okhla, Bawana and Narela in Delhi, the Noida and Greater Noida electronics belt, and the Gurugram-Manesar automotive corridor all buy transformers, chokes and reactors in volume.
VA Electricals designs and manufactures three-phase line, input and output chokes at its works in Bhosari, Pune. Every unit is built to your voltages and rating and tested in-house, then delivered by road to customers in Okhla, Bawana, Narela and across Delhi NCR.
Rated for 230 V single-phase / 415 V three-phase, 50 Hz systems, with inductance and current rating matched to your drive.
A three-phase line choke is an inductor connected in series with a drive or rectifier. On the input side it reduces harmonic current and protects the drive from line spikes and notching. On the output side it limits dv/dt and protects motors fed through long cables.
For drive users in Delhi NCR, a line choke on the input or output of a VFD reduces harmonics, limits inrush and protects the drive and motor from spikes and long-cable effects.
Reduce harmonic distortion and electrical noise on drive and rectifier supplies.
View product detailsProtect drives from line spikes and limit inrush current.
Limit dv/dt and protect motors on long cable runs.
Noida and Greater Noida host electronics, inverter and UPS manufacturers.
Typical use: Input and output chokes for VFDs and drives.
The Gurugram-Manesar belt hosts car and two-wheeler plants and hundreds of suppliers.
Typical use: Input and output chokes for VFDs and drives.
Panel builders in Okhla, Bawana and Ghaziabad supply projects across North India.
Typical use: Input and output chokes in VFD and drive panels.
Noida and Gurugram are fast-growing data-centre markets.
Typical use: Input and output chokes for VFDs and drives.
Metro, airport and commercial construction projects need MEP and control panels.
Typical use: Input and output chokes for VFDs and drives.
Large hospital chains and diagnostic centres rely on UPS and isolation transformers.
Typical use: Input and output chokes for VFDs and drives.
Plants in Delhi NCR see summer heat in panel rooms, monsoon humidity and supply fluctuations. Share your duty cycle and ambient conditions, and we design the rating, insulation and construction to suit.
| Type | Three-phase line, input and output chokes |
|---|---|
| Current rating | Up to 1000 A |
| System voltage | 230 V single-phase / 415 V three-phase, 50 Hz |
| Inductance | Matched to drive rating and % impedance required |
| Frequency | 50 Hz (Indian grid standard) |
| Construction | Open frame, panel mounting |
| Compliance | CE marked under LVD 2014/35/EU (chokes and reactors up to 1000 A); ISO 9001:2015 production |
| Routine tests | Inductance (LCR), insulation resistance, HV breakdown, winding resistance |
Orders for Delhi NCR are dispatched by road from our works in Bhosari, Pune, about 1450 km away. Every consignment is packed to protect windings and terminals in transit. Consignments travel by road transport with dispatch details shared in advance, so your project or production schedule stays on track.
Send your requirement
Of transformer design and manufacturing experience behind every unit.
ISO 9001:2015 quality system and CE conformity under the Low Voltage Directive.
Voltages, ratings, terminals and mounting made to match your design.
Production planned around your project schedule and delivery dates.
Yes. VA Electricals manufactures three-phase line, input and output chokes at its works in Pune, India and supplies customers across Delhi NCR, including Okhla, Bawana, Narela, Mayapuri, Wazirpur.
Yes. Units are built for the 230 V single-phase / 415 V three-phase, 50 Hz supply used in Delhi NCR, with inductance and current rating matched to your drive.
An input choke sits between the supply and the drive to reduce harmonics and protect against line spikes. An output choke sits between the drive and motor to limit dv/dt and protect motors on long cable runs.
VA Electricals operates an ISO 9001:2015 certified quality management system and holds MSME ZED Bronze certification. Its products carry CE conformity under the Low Voltage Directive 2014/35/EU, covering chokes and reactors up to 1000 A.
Dispatched by road from our Pune works, about 1450 km away, packed to protect windings and terminals in transit.
Yes. Tell us the ambient temperature, duty cycle and supply conditions at your plant, and we design the rating, insulation and construction to suit.
Share your voltages, rating and quantity. Our engineers will send a technical offer for supply to Okhla, Bawana, Narela or anywhere in Delhi NCR.