Nepal's industry is concentrated in the Birgunj-Hetauda corridor, the Biratnagar belt and the Kathmandu valley. Hydropower is expanding, but voltage fluctuation remains common, so factories rely on robust transformers, stabilising buck boost units and UPS systems.
VA Electricals designs and manufactures three-phase harmonic filter reactors at its works in Bhosari, Pune. Every unit is built to your voltages and rating and tested in-house, then packed for export to buyers in Kathmandu, Lalitpur, Bhaktapur and across Nepal.
Rated for 230 V single-phase / 400 V three-phase, 50 Hz systems, with reactor tuning and current rating matched to your capacitor bank and system.
A harmonic filter reactor reduces harmonic distortion caused by non-linear loads such as VFDs, UPS systems and rectifiers. Connected in series with capacitor banks, it detunes the circuit so capacitors are protected from harmonic resonance while power factor is corrected.
For facilities in Nepal with many VFDs, UPS systems or capacitor banks, harmonic filter reactors keep distortion under control and protect equipment from overheating.
Mitigate harmonics from VFDs and non-linear loads to improve power quality.
View product detailsProtect capacitor banks from harmonic resonance in power-factor correction panels.
Tuning, current rating and dimensions to your panel design.
Cement and building-material plants in Hetauda and the Terai run mills, kilns and large motors.
Typical use: Harmonic filter reactors for power quality and APFC panels.
Steel re-rolling and wire mills in Birgunj and Biratnagar run furnaces and heavy drives.
Typical use: Detuned reactors in power-factor correction panels for heavy loads.
Food, beverage and noodle plants serve the domestic market.
Typical use: Harmonic filter reactors for power quality and APFC panels.
Panel builders in Kathmandu and Birgunj supply industry and hydropower projects.
Typical use: Detuned filter reactors in APFC and harmonic filter panels.
Hydropower, solar and off-grid systems need power-conversion equipment.
Typical use: Harmonic control where inverters feed site distribution.
Hospitals and diagnostic centres rely on UPS and isolation transformers.
Typical use: Harmonic filter reactors for power quality and APFC panels.
Factories in Nepal deal with monsoon humidity, voltage fluctuation and frequent changeover to captive generators. Windings are oven-baked for moisture resistance, and ratings are chosen with margin for supply swings.
| Type | Three-phase harmonic filter / detuned reactors |
|---|---|
| Current rating | Up to 1000 A |
| System voltage | 230 V single-phase / 400 V three-phase, 50 Hz |
| Tuning | As per capacitor bank and harmonic profile |
| Frequency | 50 Hz (Nepali grid standard) |
| Construction | Open frame, panel mounting |
| Compliance | CE marked under LVD 2014/35/EU (chokes and reactors up to 1000 A); ISO 9001:2015 production |
| Routine tests | Inductance (LCR), insulation resistance, HV breakdown, winding resistance |
Nepal is reached by road from India. Consignments travel from Pune through the main border crossings at Raxaul–Birgunj, Jogbani–Biratnagar or Sunauli–Bhairahawa, then on to Kathmandu and other industrial towns.
Send your requirement
Of transformer design and manufacturing experience behind every unit.
ISO 9001:2015 quality system and CE conformity under the Low Voltage Directive.
Voltages, ratings, terminals and mounting made to match your design.
Production planned around your project schedule and export shipping dates.
Yes. VA Electricals manufactures three-phase harmonic filter reactors at its works in Pune, India and supplies buyers across Nepal, including Kathmandu, Lalitpur, Bhaktapur, Birgunj, Biratnagar.
Yes. Units are built for the 230 V single-phase / 400 V three-phase, 50 Hz supply used in Nepal, with reactor tuning and current rating matched to your capacitor bank and system.
Without a reactor, capacitors can resonate with harmonics from VFDs and UPS loads, causing overheating and failures. A series reactor detunes the circuit, protecting capacitors while power factor is corrected.
VA Electricals operates an ISO 9001:2015 certified quality management system and holds MSME ZED Bronze certification. Its products carry CE conformity under the Low Voltage Directive 2014/35/EU, covering chokes and reactors up to 1000 A.
Delivered by road from Pune through Birgunj, Biratnagar or Bhairahawa border points.
Yes. Share your supply fluctuation range, humidity and ambient conditions. Windings are oven-baked for moisture resistance and ratings are chosen with margin for voltage swings.
Share your voltages, rating and quantity. Our engineers will send a technical offer for supply to Kathmandu, Lalitpur, Bhaktapur or anywhere in Nepal.