Nepal's industry is concentrated in the Birgunj-Hetauda corridor, the Biratnagar belt and the Kathmandu valley. Hydropower is expanding, but voltage fluctuation remains common, so factories rely on robust transformers, stabilising buck boost units and UPS systems.
VA Electricals designs and manufactures buck boost transformers at its works in Bhosari, Pune. Every unit is built to your voltages and rating and tested in-house, then packed for export to buyers in Kathmandu, Lalitpur, Bhaktapur and across Nepal.
Built for 230 V single-phase / 400 V three-phase, 50 Hz, with the buck or boost amount chosen to bring your supply to the equipment's rated voltage.
A buck boost transformer raises (boosts) or lowers (bucks) the supply voltage by a small amount so equipment receives the voltage it is designed for. Because it only handles the correction voltage, it is far smaller and more economical than a full isolation transformer for the same load.
For sites in Nepal where the supply sits a little above or below what equipment is rated for, a buck boost transformer corrects the voltage economically, without a full-size transformer.
Lowers a high supply voltage to protect equipment rated for a lower voltage.
View product detailsRaises a low or sagging supply so motors and compressors run at rated voltage.
Designed around your measured supply range and load.
Cement and building-material plants in Hetauda and the Terai run mills, kilns and large motors.
Typical use: Bucking or boosting supply voltage by a small amount to match equipment.
Steel re-rolling and wire mills in Birgunj and Biratnagar run furnaces and heavy drives.
Typical use: Bucking or boosting supply voltage by a small amount to match equipment.
Food, beverage and noodle plants serve the domestic market.
Typical use: Keeping refrigeration and process motors at rated voltage.
Panel builders in Kathmandu and Birgunj supply industry and hydropower projects.
Typical use: Bucking or boosting supply voltage by a small amount to match equipment.
Hydropower, solar and off-grid systems need power-conversion equipment.
Typical use: Bucking or boosting supply voltage by a small amount to match equipment.
Hospitals and diagnostic centres rely on UPS and isolation transformers.
Typical use: Correcting voltage for imaging and laboratory equipment.
Factories in Nepal deal with monsoon humidity, voltage fluctuation and frequent changeover to captive generators. Windings are oven-baked for moisture resistance, and ratings are chosen with margin for supply swings.
| Function | Buck (step-down) or boost (step-up) voltage correction |
|---|---|
| Rating | As per load and correction required |
| Supply | 230 V single-phase / 400 V three-phase, 50 Hz systems |
| Correction | Set to bring supply to equipment's rated voltage |
| Frequency | 50 Hz (Nepali grid standard) |
| Construction | Open frame or enclosed |
| Compliance | CE marked under LVD 2014/35/EU (transformers up to 200 kVA); ISO 9001:2015 production |
| Routine tests | Ratio, no-load, insulation resistance, HV breakdown, winding resistance |
Nepal is reached by road from India. Consignments travel from Pune through the main border crossings at Raxaul–Birgunj, Jogbani–Biratnagar or Sunauli–Bhairahawa, then on to Kathmandu and other industrial towns.
Send your requirement
Of transformer design and manufacturing experience behind every unit.
ISO 9001:2015 quality system and CE conformity under the Low Voltage Directive.
Voltages, ratings, terminals and mounting made to match your design.
Production planned around your project schedule and export shipping dates.
Yes. VA Electricals manufactures buck boost transformers at its works in Pune, India and supplies buyers across Nepal, including Kathmandu, Lalitpur, Bhaktapur, Birgunj, Biratnagar.
Yes. Units are built for the 230 V single-phase / 400 V three-phase, 50 Hz supply used in Nepal, with the buck or boost amount chosen to bring your supply to the equipment's rated voltage.
When the supply only needs a small voltage correction and isolation is not required. A buck boost unit handles only the correction voltage, so it is smaller, lighter and lower in cost for the same load.
VA Electricals operates an ISO 9001:2015 certified quality management system and holds MSME ZED Bronze certification. Its products carry CE conformity under the Low Voltage Directive 2014/35/EU, covering transformers up to 200 kVA.
Delivered by road from Pune through Birgunj, Biratnagar or Bhairahawa border points.
Yes. Share your supply fluctuation range, humidity and ambient conditions. Windings are oven-baked for moisture resistance and ratings are chosen with margin for voltage swings.
Share your voltages, rating and quantity. Our engineers will send a technical offer for supply to Kathmandu, Lalitpur, Bhaktapur or anywhere in Nepal.