Qatar's LNG industry, district cooling networks and continuing infrastructure investment keep demand high for reliable power equipment. Panel builders in Doha Industrial Area and contractors serving Ras Laffan and Mesaieed buy transformers and chokes for demanding, high-temperature duty.
VA Electricals designs and manufactures buck boost transformers at its works in Bhosari, Pune. Every unit is built to your voltages and rating and tested in-house, then packed for export to buyers in Doha Industrial Area, Ras Laffan Industrial City, Mesaieed Industrial City and across Qatar.
Built for 240 V single-phase / 415 V three-phase, 50 Hz, with the buck or boost amount chosen to bring your supply to the equipment's rated voltage.
A buck boost transformer raises (boosts) or lowers (bucks) the supply voltage by a small amount so equipment receives the voltage it is designed for. Because it only handles the correction voltage, it is far smaller and more economical than a full isolation transformer for the same load.
For sites in Qatar where the supply sits a little above or below what equipment is rated for, a buck boost transformer corrects the voltage economically, without a full-size transformer.
Lowers a high supply voltage to protect equipment rated for a lower voltage.
View product detailsRaises a low or sagging supply so motors and compressors run at rated voltage.
Designed around your measured supply range and load.
Ras Laffan and Mesaieed host LNG, gas-processing and petrochemical complexes.
Typical use: Bucking or boosting supply voltage by a small amount to match equipment.
Panel builders in Doha Industrial Area supply projects across Qatar.
Typical use: Bucking or boosting supply voltage by a small amount to match equipment.
District cooling plants in Lusail, West Bay and The Pearl run large chiller drives.
Typical use: Raising low site voltage to protect compressors and motors.
Desalination, water and drainage schemes run pumping stations and treatment plants.
Typical use: Bucking or boosting supply voltage by a small amount to match equipment.
Stadium, metro and commercial developments need MEP and control panels.
Typical use: Long cable runs and low-voltage sites in commercial buildings.
Steel and aluminium smelting complexes in Mesaieed run heavy industrial loads.
Typical use: Bucking or boosting supply voltage by a small amount to match equipment.
Summer temperatures in Qatar regularly cross 45 °C, and panels often sit in hot plant rooms or outdoor enclosures. Tell us your ambient temperature and enclosure when you enquire, and we size the design for that temperature rise rather than a standard 40 °C nameplate.
| Function | Buck (step-down) or boost (step-up) voltage correction |
|---|---|
| Rating | As per load and correction required |
| Supply | 240 V single-phase / 415 V three-phase, 50 Hz systems |
| Correction | Set to bring supply to equipment's rated voltage |
| Frequency | 50 Hz (Qatar grid standard) |
| Construction | Open frame or enclosed |
| Compliance | CE marked under LVD 2014/35/EU (transformers up to 200 kVA); ISO 9001:2015 production |
| Routine tests | Ratio, no-load, insulation resistance, HV breakdown, winding resistance |
Orders for Qatar ship by sea from Nhava Sheva (JNPT) to Hamad Port, south of Doha, with onward road delivery to Doha Industrial Area, Mesaieed or Ras Laffan. Urgent consignments can travel by air freight.
Send your requirement
Of transformer design and manufacturing experience behind every unit.
ISO 9001:2015 quality system and CE conformity under the Low Voltage Directive.
Voltages, ratings, terminals and mounting made to match your design.
Production planned around your project schedule and export shipping dates.
Yes. VA Electricals manufactures buck boost transformers at its works in Pune, India and supplies buyers across Qatar, including Doha Industrial Area, Ras Laffan Industrial City, Mesaieed Industrial City, Umm Alhoul Free Zone, Lusail.
Yes. Units are built for the 240 V single-phase / 415 V three-phase, 50 Hz supply used in Qatar, with the buck or boost amount chosen to bring your supply to the equipment's rated voltage.
When the supply only needs a small voltage correction and isolation is not required. A buck boost unit handles only the correction voltage, so it is smaller, lighter and lower in cost for the same load.
VA Electricals operates an ISO 9001:2015 certified quality management system and holds MSME ZED Bronze certification. Its products carry CE conformity under the Low Voltage Directive 2014/35/EU, covering transformers up to 200 kVA.
Shipped by sea from Nhava Sheva to Hamad Port, with air freight for urgent consignments.
Yes. Share the ambient temperature and enclosure type with your enquiry. We size the core, conductor and insulation so temperature rise stays within limits in Gulf summer heat.
Share your voltages, rating and quantity. Our engineers will send a technical offer for supply to Doha Industrial Area, Ras Laffan Industrial City, Mesaieed Industrial City or anywhere in Qatar.