Surat combines one of the world's biggest textile and diamond industries with heavy industry at Hazira. Sachin and Pandesara GIDCs run thousands of looms and processing units, and the Ankleshwar-Bharuch chemical belt is close by.
VA Electricals designs and manufactures three-phase line, input and output chokes at its works in Bhosari, Pune. Every unit is built to your voltages and rating and tested in-house, then delivered by road to customers in Sachin GIDC, Hazira, Pandesara GIDC and across Surat.
Rated for 230 V single-phase / 415 V three-phase, 50 Hz systems, with inductance and current rating matched to your drive.
A three-phase line choke is an inductor connected in series with a drive or rectifier. On the input side it reduces harmonic current and protects the drive from line spikes and notching. On the output side it limits dv/dt and protects motors fed through long cables.
For drive users in Surat, a line choke on the input or output of a VFD reduces harmonics, limits inrush and protects the drive and motor from spikes and long-cable effects.
Reduce harmonic distortion and electrical noise on drive and rectifier supplies.
View product detailsProtect drives from line spikes and limit inrush current.
Limit dv/dt and protect motors on long cable runs.
Sachin, Pandesara and Palsana run thousands of water-jet looms, embroidery and processing machines.
Typical use: Chokes on loom and spinning-frame drives.
Hazira hosts large steel, engineering and port-based industries.
Typical use: Input and output chokes for VFDs and drives.
The Ankleshwar and Bharuch GIDCs are among India's largest chemical clusters.
Typical use: Input and output chokes for VFDs and drives.
Diamond cutting and polishing units use precision, electronically controlled machines.
Typical use: Input and output chokes for VFDs and drives.
Refinery, gas processing and LNG facilities operate along the Hazira coast.
Typical use: Input and output chokes for VFDs and drives.
Plastic and polymer processors run extrusion and moulding machines on VFDs.
Typical use: Chokes on extruder and moulding-machine drives.
Plants in Surat see summer heat in panel rooms, monsoon humidity and supply fluctuations. Share your duty cycle and ambient conditions, and we design the rating, insulation and construction to suit.
| Type | Three-phase line, input and output chokes |
|---|---|
| Current rating | Up to 1000 A |
| System voltage | 230 V single-phase / 415 V three-phase, 50 Hz |
| Inductance | Matched to drive rating and % impedance required |
| Frequency | 50 Hz (Indian grid standard) |
| Construction | Open frame, panel mounting |
| Compliance | CE marked under LVD 2014/35/EU (chokes and reactors up to 1000 A); ISO 9001:2015 production |
| Routine tests | Inductance (LCR), insulation resistance, HV breakdown, winding resistance |
Orders for Surat are dispatched by road from our works in Bhosari, Pune, about 420 km away. Every consignment is packed to protect windings and terminals in transit. Consignments travel by road transport with dispatch details shared in advance, so your project or production schedule stays on track.
Send your requirement
Of transformer design and manufacturing experience behind every unit.
ISO 9001:2015 quality system and CE conformity under the Low Voltage Directive.
Voltages, ratings, terminals and mounting made to match your design.
Production planned around your project schedule and delivery dates.
Yes. VA Electricals manufactures three-phase line, input and output chokes at its works in Pune, India and supplies customers across Surat, including Sachin GIDC, Hazira, Pandesara GIDC, Udhna, Kim.
Yes. Units are built for the 230 V single-phase / 415 V three-phase, 50 Hz supply used in Surat, with inductance and current rating matched to your drive.
An input choke sits between the supply and the drive to reduce harmonics and protect against line spikes. An output choke sits between the drive and motor to limit dv/dt and protect motors on long cable runs.
VA Electricals operates an ISO 9001:2015 certified quality management system and holds MSME ZED Bronze certification. Its products carry CE conformity under the Low Voltage Directive 2014/35/EU, covering chokes and reactors up to 1000 A.
Dispatched by road from our Pune works, about 420 km away, packed to protect windings and terminals in transit.
Yes. Tell us the ambient temperature, duty cycle and supply conditions at your plant, and we design the rating, insulation and construction to suit.
Share your voltages, rating and quantity. Our engineers will send a technical offer for supply to Sachin GIDC, Hazira, Pandesara GIDC or anywhere in Surat.