Thane district is one of Maharashtra's oldest engineering belts. Wagle Estate, Ambernath, Dombivli and Badlapur MIDCs host machine builders, chemical plants and panel manufacturers, while Bhiwandi has grown into a major warehousing and textile cluster.
VA Electricals designs and manufactures single-phase, three-phase and multi-tap control transformers at its works in Bhosari, Pune. Every unit is built to your voltages and rating and tested in-house, then delivered by road to customers in Wagle Estate, Thane-Belapur Road, Kolshet and across Thane.
Built for 230 V single-phase / 415 V three-phase, 50 Hz, with control secondaries such as 24 V, 110 V or 230 V, or any voltage your panel needs.
A control transformer steps the incoming supply down to a stable control voltage for contactors, relays, timers, solenoid valves, PLC I/O and indicator circuits, while electrically isolating the control circuit from the power circuit. It is designed to hold its secondary voltage during the high inrush current drawn when contactor coils and solenoids pick up.
For panel builders in Thane, a correctly sized control transformer prevents nuisance drop-outs of contactors and relays when several coils energise together, and keeps the control circuit isolated from the power circuit.
For control panels, MCC panels, relay and contactor circuits, solenoid valves and machine control circuits.
View product detailsIsolated power for CNC machines, robotic controllers and process machinery, with or without enclosure.
View product detailsSeveral primary and secondary voltages in one unit, for OEMs who ship machines to different supply standards.
View product detailsPanel builders along Wagle Estate and the Thane-Belapur Road supply control and distribution panels to industry across western India.
Typical use: Control voltage for contactor, relay and PLC circuits in MCC and PCC panels.
Dombivli and Ambernath MIDCs host many chemical, dye-intermediate and pharma units with process-control panels.
Typical use: Stable, isolated control voltage for panels and machinery.
Machine builders in Ambernath, Badlapur and Kalyan make special-purpose, packaging and process machinery.
Typical use: Isolated 24 V or 110 V control supply for CNC and special-purpose machines.
Bhiwandi's powerloom cluster runs thousands of looms that need stable supply and drive protection.
Typical use: Stable, isolated control voltage for panels and machinery.
Municipal and industrial water and effluent treatment plants run large pump and blower drives.
Typical use: Pump starter and valve actuator control circuits.
Food processing and packaging units in the Thane belt rely on conveyors, fillers and sealing machines.
Typical use: Stable, isolated control voltage for panels and machinery.
Plants in Thane see summer heat in panel rooms, monsoon humidity and supply fluctuations. Share your duty cycle and ambient conditions, and we design the rating, insulation and construction to suit.
| Phase | Single phase / Three phase |
|---|---|
| Rating | Up to 200 kVA (three-phase); VA ratings for control circuits |
| Primary voltage | 230 V / 415 V or multi-tap, as specified |
| Secondary voltage | 24 V, 48 V, 110 V, 230 V or as specified |
| Frequency | 50 Hz (Indian grid standard) |
| Winding | Double-wound isolation (auto-transformer on request) |
| Construction | Open frame or enclosed; mounting as per application |
| Compliance | CE marked under LVD 2014/35/EU (transformers up to 200 kVA); ISO 9001:2015 production |
| Routine tests | Ratio, no-load, insulation resistance, HV breakdown, winding resistance |
Orders for Thane are dispatched by road from our works in Bhosari, Pune, about 150 km away. Every consignment is packed to protect windings and terminals in transit. Being this close, deliveries are quick and our engineers are easy to reach for technical discussions or site visits.
Send your requirement
Of transformer design and manufacturing experience behind every unit.
ISO 9001:2015 quality system and CE conformity under the Low Voltage Directive.
Voltages, ratings, terminals and mounting made to match your design.
Production planned around your project schedule and delivery dates.
Yes. VA Electricals manufactures single-phase, three-phase and multi-tap control transformers at its works in Pune, India and supplies customers across Thane, including Wagle Estate, Thane-Belapur Road, Kolshet, Bhiwandi, Ambernath MIDC.
Yes. Units are built for the 230 V single-phase / 415 V three-phase, 50 Hz supply used in Thane, with control secondaries such as 24 V, 110 V or 230 V, or any voltage your panel needs.
Control transformers are made in single-phase and three-phase designs, with three-phase units up to 200 kVA and VA ratings to suit control circuits. Multi-tap versions combine several primary and secondary voltages in one unit.
VA Electricals operates an ISO 9001:2015 certified quality management system and holds MSME ZED Bronze certification. Its products carry CE conformity under the Low Voltage Directive 2014/35/EU, covering transformers up to 200 kVA.
Dispatched by road from our Pune works, about 150 km away, packed to protect windings and terminals in transit.
Yes. Tell us the ambient temperature, duty cycle and supply conditions at your plant, and we design the rating, insulation and construction to suit.
Share your voltages, rating and quantity. Our engineers will send a technical offer for supply to Wagle Estate, Thane-Belapur Road, Kolshet or anywhere in Thane.