The UAE has one of the busiest control-panel and MEP markets in the Gulf. Panel builders, OEMs and contractors across Dubai, Abu Dhabi and Sharjah need transformers and chokes that perform reliably in very high ambient heat.
VA Electricals designs and manufactures three-phase line, input and output chokes at its works in Bhosari, Pune. Every unit is built to your voltages and rating and tested in-house, then packed for export to buyers in Dubai – JAFZA, Dubai Industrial City, Dubai Investments Park and across the UAE.
Rated for 230 V single-phase / 400 V three-phase, 50 Hz systems, with inductance and current rating matched to your drive.
A three-phase line choke is an inductor connected in series with a drive or rectifier. On the input side it reduces harmonic current and protects the drive from line spikes and notching. On the output side it limits dv/dt and protects motors fed through long cables.
For drive users in the UAE, a line choke on the input or output of a VFD reduces harmonics, limits inrush and protects the drive and motor from spikes and long-cable effects.
Reduce harmonic distortion and electrical noise on drive and rectifier supplies.
View product detailsProtect drives from line spikes and limit inrush current.
Limit dv/dt and protect motors on long cable runs.
MCC, PCC and automation panels built in JAFZA, Dubai Industrial City, Sharjah and Mussafah.
Typical use: Input and output chokes in VFD and drive panels.
Chiller plant, AHU and pump panels for commercial towers and district cooling plants.
Typical use: VFD chokes on AHU fans and chilled-water pumps.
Pump, valve and SCADA panels in desalination, water treatment and sewage plants.
Typical use: Drive chokes for large pump motors.
Skid control panels and auxiliary circuits for process and utility packages.
Typical use: Input and output chokes for VFDs and drives.
CNC, fabrication and packaging machinery in Sharjah, Ajman and RAK industrial zones.
Typical use: Protecting machine drives from line spikes and notching.
Lift, fire-pump, lighting control and BMS panels supplied by MEP contractors.
Typical use: Input and output chokes for VFDs and drives.
Summer temperatures in the UAE regularly cross 45 °C, and panels often sit in hot plant rooms or outdoor enclosures. Tell us your ambient temperature and enclosure when you enquire, and we size the design for that temperature rise rather than a standard 40 °C nameplate.
| Type | Three-phase line, input and output chokes |
|---|---|
| Current rating | Up to 1000 A |
| System voltage | 230 V single-phase / 400 V three-phase, 50 Hz |
| Inductance | Matched to drive rating and % impedance required |
| Frequency | 50 Hz (UAE grid standard) |
| Construction | Open frame, panel mounting |
| Compliance | CE marked under LVD 2014/35/EU (chokes and reactors up to 1000 A); ISO 9001:2015 production |
| Routine tests | Inductance (LCR), insulation resistance, HV breakdown, winding resistance |
Our works in Pune is a short road trip from Nhava Sheva (JNPT), India's main container port. Orders for the UAE go by sea to Jebel Ali, Khalifa Port or Sharjah, a short route across the Arabian Sea. Urgent or smaller consignments can travel by air freight.
Send your requirement
Of transformer design and manufacturing experience behind every unit.
ISO 9001:2015 quality system and CE conformity under the Low Voltage Directive.
Voltages, ratings, terminals and mounting made to match your design.
Production planned around your project schedule and export shipping dates.
Yes. VA Electricals manufactures three-phase line, input and output chokes at its works in Pune, India and supplies buyers across the UAE, including Dubai – JAFZA, Dubai Industrial City, Dubai Investments Park, Al Quoz, Abu Dhabi – ICAD / Mussafah.
Yes. Units are built for the 230 V single-phase / 400 V three-phase, 50 Hz supply used in the UAE, with inductance and current rating matched to your drive.
An input choke sits between the supply and the drive to reduce harmonics and protect against line spikes. An output choke sits between the drive and motor to limit dv/dt and protect motors on long cable runs.
VA Electricals operates an ISO 9001:2015 certified quality management system and holds MSME ZED Bronze certification. Its products carry CE conformity under the Low Voltage Directive 2014/35/EU, covering chokes and reactors up to 1000 A.
Shipped by sea from Nhava Sheva to Jebel Ali, Khalifa Port or Sharjah, with air freight for urgent consignments.
Yes. Share the ambient temperature and enclosure type with your enquiry. We size the core, conductor and insulation so temperature rise stays within limits in Gulf summer heat.
Share your voltages, rating and quantity. Our engineers will send a technical offer for supply to Dubai – JAFZA, Dubai Industrial City, Dubai Investments Park or anywhere in the UAE.