Chennai is often called the Detroit of India. Sriperumbudur, Oragadam and Maraimalai Nagar host vehicle plants and large electronics factories, while Ambattur and Guindy remain busy engineering estates.
VA Electricals designs and manufactures buck boost transformers at its works in Bhosari, Pune. Every unit is built to your voltages and rating and tested in-house, then delivered by road to customers in Ambattur, Guindy, Sriperumbudur and across Chennai.
Built for 230 V single-phase / 415 V three-phase, 50 Hz, with the buck or boost amount chosen to bring your supply to the equipment's rated voltage.
A buck boost transformer raises (boosts) or lowers (bucks) the supply voltage by a small amount so equipment receives the voltage it is designed for. Because it only handles the correction voltage, it is far smaller and more economical than a full isolation transformer for the same load.
For sites in Chennai where the supply sits a little above or below what equipment is rated for, a buck boost transformer corrects the voltage economically, without a full-size transformer.
Lowers a high supply voltage to protect equipment rated for a lower voltage.
View product detailsRaises a low or sagging supply so motors and compressors run at rated voltage.
Designed around your measured supply range and load.
Oragadam, Sriperumbudur and Maraimalai Nagar host car, truck and two-wheeler plants and their suppliers.
Typical use: Bucking or boosting supply voltage by a small amount to match equipment.
Electronics manufacturing in Sriperumbudur builds phones, appliances and power products.
Typical use: Bucking or boosting supply voltage by a small amount to match equipment.
Ambattur and Guindy estates host machine shops and capital equipment makers.
Typical use: Correcting supply voltage for imported machines rated for a different voltage.
Panel builders serve automotive, process and infrastructure projects.
Typical use: Bucking or boosting supply voltage by a small amount to match equipment.
Desalination plants and water utilities run large pumping stations.
Typical use: Bucking or boosting supply voltage by a small amount to match equipment.
Chennai's landing stations and data-centre campuses need resilient power systems.
Typical use: Bucking or boosting supply voltage by a small amount to match equipment.
Plants in Chennai see summer heat in panel rooms, monsoon humidity and supply fluctuations. Share your duty cycle and ambient conditions, and we design the rating, insulation and construction to suit.
| Function | Buck (step-down) or boost (step-up) voltage correction |
|---|---|
| Rating | As per load and correction required |
| Supply | 230 V single-phase / 415 V three-phase, 50 Hz systems |
| Correction | Set to bring supply to equipment's rated voltage |
| Frequency | 50 Hz (Indian grid standard) |
| Construction | Open frame or enclosed |
| Compliance | CE marked under LVD 2014/35/EU (transformers up to 200 kVA); ISO 9001:2015 production |
| Routine tests | Ratio, no-load, insulation resistance, HV breakdown, winding resistance |
Orders for Chennai are dispatched by road from our works in Bhosari, Pune, about 1180 km away. Every consignment is packed to protect windings and terminals in transit. Consignments travel by road transport with dispatch details shared in advance, so your project or production schedule stays on track.
Send your requirement
Of transformer design and manufacturing experience behind every unit.
ISO 9001:2015 quality system and CE conformity under the Low Voltage Directive.
Voltages, ratings, terminals and mounting made to match your design.
Production planned around your project schedule and delivery dates.
Yes. VA Electricals manufactures buck boost transformers at its works in Pune, India and supplies customers across Chennai, including Ambattur, Guindy, Sriperumbudur, Oragadam, Irungattukottai.
Yes. Units are built for the 230 V single-phase / 415 V three-phase, 50 Hz supply used in Chennai, with the buck or boost amount chosen to bring your supply to the equipment's rated voltage.
When the supply only needs a small voltage correction and isolation is not required. A buck boost unit handles only the correction voltage, so it is smaller, lighter and lower in cost for the same load.
VA Electricals operates an ISO 9001:2015 certified quality management system and holds MSME ZED Bronze certification. Its products carry CE conformity under the Low Voltage Directive 2014/35/EU, covering transformers up to 200 kVA.
Dispatched by road from our Pune works, about 1180 km away, packed to protect windings and terminals in transit.
Yes. Tell us the ambient temperature, duty cycle and supply conditions at your plant, and we design the rating, insulation and construction to suit.
Share your voltages, rating and quantity. Our engineers will send a technical offer for supply to Ambattur, Guindy, Sriperumbudur or anywhere in Chennai.